Added in version 3.12.
———
Note
sys.monitoring is a namespace within the
module, not an independent module, and importsys.monitoring would fail with a
. Instead, simply importsys and then use sys.monitoring.
This namespace provides access to the functions and constants necessary to activate and control event monitoring.
As programs execute, events occur that might be of interest to tools that monitor execution. The sys.monitoring namespace provides means to receive callbacks when events of interest occur.
The monitoring API consists of three components:
Tool identifiers
A tool identifier is an integer and the associated name. Tool identifiers are used to discourage tools from interfering with each other and to allow multiple tools to operate at the same time. Currently tools are completely independent and cannot be used to monitor each other. This restriction may be lifted in the future.
Before registering or activating events, a tool should choose an identifier. Identifiers are integers in the range 0 to 5 inclusive.
Registering and using tools
sys.monitoring.use_tool_id(tool_id:
, name:
, /)→
Must be called before tool_id can be used. tool_id must be in the range 0 to 5 inclusive. Raises a
if tool_id is in use.
sys.monitoring.clear_tool_id(tool_id:
, /)→
Unregister all events and callback functions associated with tool_id.
sys.monitoring.free_tool_id(tool_id:
, /)→
Should be called once a tool no longer requires tool_id. Will call
before releasing tool_id.
sys.monitoring.get_tool(tool_id:
, /)→
|
Returns the name of the tool if tool_id is in use, otherwise it returns None. tool_id must be in the range 0 to 5 inclusive.
All IDs are treated the same by the VM with regard to events, but the following IDs are pre-defined to make co-operation of tools easier:
sys.monitoring.DEBUGGER_ID=0sys.monitoring.COVERAGE_ID=1sys.monitoring.PROFILER_ID=2sys.monitoring.OPTIMIZER_ID=5Events
The following events are supported:
sys.monitoring.events.BRANCH_LEFT
A conditional branch goes left.
It is up to the tool to determine how to present “left” and “right” branches. There is no guarantee which branch is “left” and which is “right”, except that it will be consistent for the duration of the program.
sys.monitoring.events.BRANCH_RIGHT
A conditional branch goes right.
sys.monitoring.events.CALL
A call in Python code (event occurs before the call).
sys.monitoring.events.C_RAISE
An exception raised from any callable, except for Python functions (event occurs after the exit).
sys.monitoring.events.C_RETURN
Return from any callable, except for Python functions (event occurs after the return).
sys.monitoring.events.EXCEPTION_HANDLED
An exception is handled.
sys.monitoring.events.INSTRUCTION
A VM instruction is about to be executed.
sys.monitoring.events.JUMP
An unconditional jump in the control flow graph is made.
sys.monitoring.events.LINE
An instruction is about to be executed that has a different line number from the preceding instruction.
sys.monitoring.events.PY_RESUME
Resumption of a Python function (for generator and coroutine functions), except for throw() calls.
sys.monitoring.events.PY_RETURN
Return from a Python function (occurs immediately before the return, the callee’s frame will be on the stack).
sys.monitoring.events.PY_START
Start of a Python function (occurs immediately after the call, the callee’s frame will be on the stack)
sys.monitoring.events.PY_THROW
A Python function is resumed by a throw() call.
sys.monitoring.events.PY_UNWIND
Exit from a Python function during exception unwinding. This includes exceptions raised directly within the function and that are allowed to continue to propagate.
sys.monitoring.events.PY_YIELD
Yield from a Python function (occurs immediately before the yield, the callee’s frame will be on the stack).
sys.monitoring.events.RAISE
An exception is raised, except those that cause a
event.
sys.monitoring.events.RERAISE
An exception is re-raised, for example at the end of a
block.
sys.monitoring.events.STOP_ITERATION
An artificial
is raised; see
.
More events may be added in the future.
These events are attributes of the sys.monitoring.events namespace. Each event is represented as a power-of-2 integer constant. To define a set of events, simply bitwise OR the individual events together. For example, to specify both
and
events, use the expression PY_RETURN|PY_START.
sys.monitoring.events.NO_EVENTS
An alias for 0 so users can do explicit comparisons like:
ifget_events(DEBUGGER_ID)==NO_EVENTS:...Setting this event deactivates all events.
Local events
Local events are associated with normal execution of the program and happen at clearly defined locations. All local events can be disabled. The local events are:
Deprecated event
BRANCH
The BRANCH event is deprecated in 3.14. Using
and
events will give much better performance as they can be disabled independently.
Ancillary events
Ancillary events can be monitored like other events, but are controlled by another event:
The
and
events are controlled by the
event. C_RETURN and C_RAISE events will only be seen if the corresponding CALL event is being monitored.
Other events
Other events are not necessarily tied to a specific location in the program and cannot be individually disabled via
.
The other events that can be monitored are:
The STOP_ITERATION event
specifies that a
exception is raised when returning a value from a generator or coroutine. However, this is a very inefficient way to return a value, so some Python implementations, notably CPython 3.12+, do not raise an exception unless it would be visible to other code.
To allow tools to monitor for real exceptions without slowing down generators and coroutines, the
event is provided. STOP_ITERATION can be locally disabled, unlike
.
Note that the
event and the
event for a
exception are equivalent, and are treated as interchangeable when generating events. Implementations will favor STOP_ITERATION for performance reasons, but may generate a RAISE event with a StopIteration.
Turning events on and off
In order to monitor an event, it must be turned on and a corresponding callback must be registered. Events can be turned on or off by setting the events either globally and/or for a particular code object. An event will trigger only once, even if it is turned on both globally and locally.
Setting events globally
Events can be controlled globally by modifying the set of events being monitored.
sys.monitoring.get_events(tool_id:
, /)→
Returns the int representing all the active events.
sys.monitoring.set_events(tool_id:
, event_set:
, /)→
Activates all events which are set in event_set. Raises a
if tool_id is not in use.
No events are active by default.
Per code object events
Events can also be controlled on a per code object basis. The functions defined below which accept a
should be prepared to accept a look-alike object from functions which are not defined in Python (see
).
sys.monitoring.get_local_events(tool_id:
, code:
, /)→
Returns all the
for code
sys.monitoring.set_local_events(tool_id:
, code:
, event_set:
, /)→
Activates all the
for code which are set in event_set. Raises a
if tool_id is not in use.
Disabling events
sys.monitoring.DISABLE
A special value that can be returned from a callback function to disable events for the current code location.
can be disabled for a specific code location by returning
from a callback function. This does not change which events are set, or any other code locations for the same event.
Disabling events for specific locations is very important for high performance monitoring. For example, a program can be run under a debugger with no overhead if the debugger disables all monitoring except for a few breakpoints.
If
is returned by a callback for a
,
will be raised by the interpreter in a non-specific location (that is, no traceback will be provided).
sys.monitoring.restart_events()→
Enable all the events that were disabled by
for all tools.
Registering callback functions
sys.monitoring.register_callback(tool_id:
, event:
, func:
|
, /)→
|
Registers the callable func for the event with the given tool_id
If another callback was registered for the given tool_id and event, it is unregistered and returned. Otherwise register_callback() returns None.
Raises an
sys.monitoring.register_callback with argument func.
Functions can be unregistered by calling sys.monitoring.register_callback(tool_id,event,None).
Callback functions can be registered and unregistered at any time.
Callbacks are called only once regardless if the event is turned on both globally and locally. As such, if an event could be turned on for both global and local events by your code then the callback needs to be written to handle either trigger.
Callback function arguments
sys.monitoring.MISSING
A special value that is passed to a callback function to indicate that there are no arguments to the call.
When an active event occurs, the registered callback function is called. Callback functions returning an object other than
will have no effect. Different events will provide the callback function with different arguments, as follows:
and
:
func(code:CodeType,instruction_offset:int)->object
and
:
func(code:CodeType,instruction_offset:int,retval:object)->object
,
and
(arg0 can be
specifically):
func(code:CodeType,instruction_offset:int,callable:object,arg0:object)->objectcode represents the code object where the call is being made, while callable is the object that is about to be called (and thus triggered the event). If there are no arguments, arg0 is set to
.
For instance methods, callable will be the function object as found on the class with arg0 set to the instance (i.e. the self argument to the method).
,
,
,
,
and
:
func(code:CodeType,instruction_offset:int,exception:BaseException)->object
:
func(code:CodeType,line_number:int)->object
,
and
:
func(code:CodeType,instruction_offset:int,destination_offset:int)->objectNote that the destination_offset is where the code will next execute.
:
func(code:CodeType,instruction_offset:int)->object